Partition Chromatography
Camag Scientific Horizontal Developing Chamber For 20 X 10 Cm Plates
In The Horizontal Developing Chambers, Hptlc Plates Can Be Developed From Both Opposing Sides Towards The Middle. This Permits The Number Of Samples To Be Doubled As Compared With Development In A Tank, Provided The Separation Distance Of 45 Mm, I.E. 50 Mm Minus 5 Mm Distance From The Edge, Is Sufficient. This Chamber Type Is Often Used For Screening Purposes. The Obtained Chromatograms Differ From Those Obtained With The Same Mobile Phase System Developed In Vertical Chambers. This Chamber Is Suitable For Plates Up To 20 X 10 Cm In Size.
Bellco Glass, Inc. Stainless Steel Platform Tray, 20x20" "
For use with sticky matt tape (7740-40000). Dimensions: 20"x20", .050" thick w/ 1/2" lip with pegs. Will fit any Bellco rocker or shaker. Plain tray - no rubber matt.. MADE IN THE USA
SKC Inc PHENOL DEVELOPING SOLU. 16OZ
DOES NOT ship to Alaska, Arizona, California, Colorado, Hawaii, Idaho, Nevada, Oregon, Utah, Washington. Wyoming”
Electron Microscopy Sciences EMS Film Racks for 3 1/4 x4" Film
Fabricated acrylic racks that are designed to fit with Kodak developing tanks. Sheet film is firmly held in the slots in the side rails while solution is freely circulating inside the tank. Measurements 3.5 x 6-7/8 x 6"H. Holds 18 sheets of film 3 1/4 x 4"
Sorbent Technologies Inc Sorbtech Rocket - TLC Development Chamber
Sorbtech Rocket TLC Chamber for 2.5 x 7.5cm TLC Plates - an innovative, TLC small-scale development chamber that delivers more efficient, effective, and safer handling of TLC. Solvent consumption is reduced by 80-85%. Rf overruns are eliminated using a reduced solvent. Overall operational time is faster. Results are far more consistent test to test. The TLC plate is always kept in the same orientation. Rocket shape and white background provide easy visualization. Can be used with glass, plastic, and aluminum backed plates.
Camag Scientific Dip Tank 20 X 20 Cm
Dip Tank (Sintered Sheet Glass) For Plates 20 X 20 Cm, With Lid, For Use With The Chromatogram Immersion Device 3
Miles Scientific Plate Holder (Plastic), Holds 25 plates
This TLC plate holder is lightweight and made of polypropylene. It is thus highly resistant to contamination or other ill affects from exposure to typical TLC solvents.The sloping bottom grooves guide TLC plates to the vertical grooves which hold plates in an upright position. Holds up to 25 TLC plates of any size. Dimensions: 10.5" x 8.0" x 4.0" (L x W x H)
Chemglass Life Sciences TLC Developing Tank, Complete
Heavy duty, molded TLC developing tank for use with plates up to 20 x 20 cm ( 8in x 8in). The weight of the tank is approximately 15 pounds, and the bottom is ground to insure stability. Inside dimensions of the tank are 27cm wide x 7cm deep x 26 cm high (10 5/8in x 2 7/8in x 10in). Tank is supplied complete with lid.
Camag Scientific Twin Trough Chamber For 20 X 20 Cm Plates, With Stainless Steel Lid
This Is A Classical Developing Tank For Thin-Layer Chromatography. Compared To A Flat Bottom Chamber Less Solvent Is Needed. A Twin-Trough-Chamber Reduces Disposal Problems And Allows Preconditioning Of The Plate With Any Solvent And For Any Duration. For Preconditioning Or Saturation, The Trough Opposite To The Plate Is Filled With Developing Solvent. The Use Of A Saturation Pad Is Recommended For A Fast, Homogeneous And Reproducible Chamber Saturation Process. This Tank Is Suitable For Plates Up To 20 X 20 Cm In Size.